While these issues can be fixed by following lengthy and confusing tutorials or spending hefty at service centers, it would be great if there is a simple and reliable alternative.

For this purpose, we looked for solutions and found tools designed to tackle iPadOS system problems. This article will feature arguably the top 7 tools to help repair iPadOS devices; the best part is they can also repair iOS devices.

Top 7 Tools to Repair iPadOS System Problems

1. Reiboot – Simplifies troubleshooting and fixes issues with a single click

ReiBoot, developed by Tenorshare, is an iPad repair utility aiming to simplify the process of troubleshooting and fixing various iPad issues. This tool stands out for its ability to fix software-related problems across most iPad and iPhone models.

Notably, iPad users use it frequently to fix issues like getting stuck on the boot logo, recovery mode, etc., and the reason for choosing it is that it can fix most software issues with just a single click, eliminating the need for lengthy procedures.

While Reiboot focuses more on fixing iOS related issues, the 150 fixes offered can be applied to iPadOS software issues and do the fixing effortlessly. To test its potential, we connected our old iPad to ReiBoot, which was endlessly rebooting or being stuck at the boot logo, and to our surprise, the issues were resolved when we tried several fixes.

Regarding modes, the basic repair mode does fix most iPadOS software-related issues. However, if the issue turns out to be critical, the deep repair mode comes to the save, but at the cost of data loss as the iPad restores and newer or compatible iPadOS is usually installed.

Considering it has a lot of fixes offered, we could put a few to the test. While not every fix can fix the iPad, you must be specific while selecting the issue for the tool to perform well.

Even though this approach makes the fix easy, a person lacking awareness of the issue might struggle to get the issue sorted instantly.

Pros

• Comprehensive solution for iPadOS system issues
• Single-click feature for most problems
• Versatile with a wide range of iPad models
• Allows iOS/iPadOS downgrading without data loss or jailbreaking

Cons

• Deep repair mode may result in data loss
• Occasional tool lags require system restart

Pricing: Free version available; plans start at $24.95 per month

2. Dr.Fone – System Repair – Best tool for fixing iPadOS issues without data loss

While testing Dr.Fone – System Repair, we have tried almost every tool offered and identified its strengths and potential improvements. What stood out the best for us was its exceptional ability to fix iPad issues that iPadOS causes.

Like every other tool in this segment, this tool is also focused on fixing iPhone issues, but don’t worry, as the fixes offered are compatible with iPads and iPods.

Many of us might have gone with iTunes to fix the iPad issues, and as the only option for any fix is to restore, the final consequence is data loss. This is where Dr.Fone comes in, as it addresses and fixes many iPad, iPhone, and iPod issues without losing data.

However, data loss is inevitable when opting for the “Advanced Mode”; we suggest using it if the issues aren’t fixed in the standard mode.

Like Reiboot, apart from fixing software-related issues, you are also offered the unique feature of rolling back their iPads to an earlier version without the hassles of data loss or the complexities of jailbreaking.

Even though this tool is ideal for iPads and iPhones, we have noticed better results while fixing Android devices, and we believe there’s room for improvement regarding the fixes offered to iPads.

Pros

• Efficiently address iPad, iPod, and iPhone issues
• Safeguards data during most repair processes
• Allows iOS/iPadOS downgrading without data loss or jailbreaking

Cons

• Advanced Mode results in data loss
• The fixes could be improved for iPhones and iPads.

Pricing: Free version available; iOS Toolkit starts at $99.95 per year

3. AnyFix – Comprehensive tool with a user-friendly interface

For Apple users, encountering issues on iPads, iPhones, or even iPods can be frustrating, as fixing them isn’t like Android devices. For this scenario, you can consider checking out AnyFix by iMobie, a comprehensive solution to all iPad and iPhone issues.

Like Reiboot and Dr.Fone, AnyFix has a user-friendly interface that tech-savvy individuals and novices can use. We have suggested AnyFix in this compilation as the fixes turned out to be great, and we felt it is a great repair tool with impressive flexibility while working on iPads and iPhones.

AnyFix has got you covered, from accessing recovery mode, device resetting, and iOS/iPadOS version management to troubleshooting iTunes issues. Also, the tool provides different repair modes, each focusing on minimizing data loss concerns.

While we had no data loss with the standard mode, the deep/advanced mode has erased data on our iPad, which is inevitable as it restored the iPad. Also, we are disappointed with the free version as it has many paywall restrictions that are significantly more than Reiboot and Dr.Fone. Hence, to experience its full potential, you are forced to purchase the premium version.

Pros

• Versatile tool for iPad, iPhone, and iPod system issues
• User-friendly repair modes with minimal data loss
• It comes with comprehensive features that help take full control of the iPad

Cons

• The full feature set is available only in the paid version
• Advanced mode erases all data on the iPad

Pricing: Free version available; plans start at $35.39, billed every three months.

4. Joyoshare UltFix – Best beginner tool to fix iPadOS issues

Joyoshare Ultfix can be a great tool for fixing software-related issues on iPhones and iPads. While it has a user-friendly interface, the best part is the ability of even beginners to use the fixes to restore their iPads and iPhones effortlessly.

For instance, if your iPad suddenly freezes or frequently reboots, considering it is software-related, Joyoshare Ultfix can fix it immediately in a few steps.

While it’s compatible with many Apple devices, from iPhones to iPads, you must identify the issue and choose the fix carefully. The tool’s advanced and ultimate modes might lead to data loss during system recovery, which is inevitable. However, its perpetual plan at an affordable price is what makes it stand out.

Pros

• Simple user interface 
• Compatible with a variety of iOS devices 
• Quickly resolves a wide range of problems

Cons

• Data loss during system recovery is possible
• Recovery times are slower than those of competitors

Pricing: Free version available; perpetual plans start at $49.95

5. MyFone Fixppo – Reliable choice for iPad issues with broad compatibility

When resolving iPad issues, iMyFone Fixppo stands out as a reliable choice. Not only is it limited to iPhones and iPods, but its fixes are also limited to iPads. Imagine using your iPad, which continuously displays software-related issues; with iMyFone Fixppo, you can fix the issues immediately.

iMyFone Fixppo is compatible with all iOS devices and versions, making it a versatile choice. Even if you’re not tech-savvy, its straightforward design ensures a hassle-free experience. Like every prominent tool, the reset can be done without a password.

Moreover, transitioning between recovery modes is just a click away. However, while the trial version is free, it offers limited functionalities. And for those on a budget, its premium plans might feel expensive compared to other alternatives in the market.

Pros

• Broad compatibility with all iOS devices, including iPads
• User-friendly design suitable for beginners
• Simplifies the process of toggling between recovery modes

Cons

• Limited features in the free trial version.
• Premium plans might be pricier than some competitors

Pricing: Free version available; plans start at $39.99

6. UltFone iOS System Repair – Best one-step fixes and seamless recovery mode

UltFone iOS System Repair is arguably one of the great tools that can easily fix iPad, iPhone, and iPod issues. During our testing, we could effectively fix a few software issues on the iPad, and none were repeated.

While the interface is easy to use, the best part is it has fixes that can be done in one step, and getting in and out of recovery mode is easy.

The 150 fixes focused more on iOS than iPadOS, which felt a little disappointing. However, the repair modes offered focus on preserving the data, but the advanced modes can cause data loss. On the other hand, resetting iPads and iPhones can be done without passwords or iTunes, along with the ability to unlock screen lock.

Even though the plans are expensive, if you opt for a perpetual license, you will arguably have one of the best iPad repair tools.

Pros

• Seamless transition into and out of recovery mode
• Comprehensive solutions for a vast array of iOS issues
• Password-less device reset and unlocking capabilities

Cons

• Premium features come at a higher price point, forced to purchase a perpetual license

Pricing: Free version available; plans start at $24.95 per month

iTunes – Best tool to solve critical issues on Apple devices

Unlike the above tools, iTunes is the tool Apple offers for their users to manage their Apple devices. While iTunes doesn’t offer any fixes, it must be used as a repair tool with some learning.

There lies a common fix for all issues on iTunes, which is ideal for critical software-related problems, but for generic fixes, it isn’t the right tool, as data loss is inevitable. Hence, if you’re aware of using iTunes and if the iPad issue is critical, iTunes is arguably the best option than the above mentioned.

With everything said, don’t get the wrong idea about iTunes, as it is a great tool to manage and fix Apple devices. However, it isn’t for beginners as it can be too complex, and there is potential for making irrecoverable mistakes that can leave the device bricked.

Pros

• Official Apple tool for device management
• Ideal for addressing critical software issues
• A comprehensive tool for managing and fixing all Apple devices

Cons

• Not suitable for generic fixes as data loss is inevitable
• Complexity makes it unsuitable for beginners
• Risk of irreversible errors; can lead to bricked devices

Pricing: Completely free

Wrapping up

This comprehensive review delved into the top 7 tools to address iPadOS system problems. From ReiBoot’s single-click solutions to iTunes, Apple’s official device management tool, each offers unique features and capabilities.

While some tools like Reiboot, Dr.Fone, and AnyFix offer great fixes and prioritize data preservation, others like iTunes demand a steeper learning curve but provide robust solutions for critical issues.

On the other hand, tools like Ultfix, Fixppo, and UltFone iOS System Repair are great tools but can be alternatives to our top three. Hence, choosing a tool that aligns with your technical expertise and the severity of the device issue is essential.

FAQs

Is there a way to downgrade my iPadOS without data loss or jailbreaking?

Yes, tools like Reiboot, Dr.Fone, and AnyFix allow users to downgrade their iOS/iPadOS versions without risking data loss or jailbreaking.

If I’m a beginner, can I use iTunes to fix my iPad?

If you’re a beginner, we suggest using iTunes for simple actions like updating and resetting your Apple device. However, with learning, you can eventually fix critical software-related issues on iPads and iPhones.

Why is my iPad not detecting on any tools?

Ensure your iPad is turned off; put it to recovery mode if it isn’t booting. If nothing helps, change the cable, switch the USB port, and try again.

If your iPad is facing this issue, there are a few things you can do to try and fix the problem. This guide will explore some of the most effective methods for fixing an overheating iPad and bring its performance back to its former glory.

Related: Top 7 Tools to Repair iPadOS System Problems (Works with iOS too)

iPad overheating vs. iPad getting warm

So before we dive into the reasons behind your iPad overheating and how to fix overheating iPad, we feel like we should take the time to differentiate between an overheated iPad and one that gets warm during usage. Now, it’s not difficult to differentiate between the two, but this might prove very helpful for new iPad users.

iPads generate heat when their processors work, which is why they start warming when you use them for a few hours. On the other hand, overheating can be differentiated from this just by comparing the temperatures of your iPad in both cases. When an iPad gets warm, you can keep holding it and using it, but an overheated iPad becomes too hot to hold and starts to crash and pose other problems.

Why is my iPad getting hot?

There might be many reasons behind your iPad overheating, which might vary depending on your situation. Still, this section will discuss the most common causes of iPad overheating. You can look at these reasons, and if any of these correspond to the problem you’re facing, you can fix it by using the appropriate methods listed in the next section.

Faulty/Bad Battery

If your iPad has a defective or depleted battery, it might contribute to your laptop overheating. Faulty batteries can cause many problems in your iPad and pose a considerable risk to your iPad’s internal hardware. Defective batteries can lead to problems with the wiring and circuitry of your iPad, which can lead to a drop in the heat dissipation in your iPad, thus causing it to overheat.

Lack of a Fan

It would help if you kept in mind that despite having a strong processor, your iPad is not a fan-powered machine. Your iPad has no built-in radiators or cooling fans, unlike laptops and desktop computers, which have these features. The iPad’s bottom vents are also inadequately sized. Additionally, heat rises, so unless you use your iPad while hanging upside down, the internal heat must accumulate to the point where the bottom speaker vents and the metal chassis are the only places it can escape. All these factors contribute to your iPad overheating.

Too Many Apps Running

Another reason behind your iPad overheating could be a heavy load of apps on your iPad. Depending on the exact model of your iPad, the actual workload might vary, but no matter how strong your processor is, there is always a cap on the number of apps your iPad can run in its background simultaneously. If you exceed this cap, your iPad might start to crash and get overheated.

Excessive Load on Processor

When your iPad’s CPU has been operating at maximum efficiency for a prolonged period, the system becomes overloaded with heat from all the firing circuits. Keep in mind that, unlike your computer, the iPad lacks a fan. The only processor onboard is forced to handle everything you throw because it also lacks a dedicated GPU.

Even if the most recent iPads with M1 and M2 CPUs beat typical desktop PCs in terms of raw performance, they are limited by the absence of a dedicated graphics card and an adequate cooling system. Hence, regardless of how powerful your iPad is, graphics-intensive tasks are a significant reason it is heating up.

Hot Environment/Surroundings

If you spend a lot of time working outside in the sun and the temperature is too high for your iPad to manage, this could cause your iPad to overheat. One example of this might be your workplace, mainly if your profession involves you in a high-temperature environment or proximity to sources of extraordinary heat. This also occurs if your iPad is in an enclosed space and exposed to direct sunlight, such as the truck cabin or in the car.

Power Fluctuation

Power fluctuations are another factor that could cause you to end up with an overheated iPad. One of the ways your iPad could be facing power fluctuations could be a faulty socket, but a more common reason is the use of an unsuited power brick. For example, you could seriously damage your iPad’s battery if you use a fast charger, especially a 98-watt charging brick.

While fast charging can occasionally be beneficial, if it becomes your main method of charging your iPad, you risk doing long-term harm to it. Additionally, the battery may overheat if you use a third-party power supply that Apple hasn’t approved, so this might be something you need to keep an eye on.

How to cool down overheated iPad

Once you’ve discovered the exact reason behind your iPad overheating, the next step is to fix the problem so you can get your iPad back into working condition. There are many methods you can use to fix an overheated iPad, but the most important ones are:

Remove Charging Cable

If your iPad is connected to the charger when it overheats, the first step should always be to disconnect the charger. In many cases, your iPad might be overheating due to power fluctuations, so this step might help remove the problem. But even if overheating cause isn’t a fluctuation in the power lines, disconnecting the charger can be helpful in other ways too.

Close All Apps

After disconnecting your iPad from a charger, you should close all apps open in the background of your iPad. A heavy load on the processor could result from too many background apps or a single CPU-intensive app, but this step will prove helpful in either of these scenarios. Without a heavy load on the processor, your iPad might lose some of its accumulated heat.

Move Your iPad

If you’re in a place where the temperature is high, or if you happen to be near a flame source such as a campfire or a BBQ grill, you should move your iPad to a place that has a lower temperature. And no, freezers and refrigerators should never be used for this purpose.

If your iPad is directly under the sun, you can move it indoors or to a place with lots of shade to prevent sunlight from impacting your device. Something similar should be done if you left your iPad in your car and it overheated.

Power off and Restart

The next step in fixing your overheard iPad should be to power off your iPad and wait for it to cool down a bit. Once your iPad regains a favorable temperature, you can restart it and see if it works properly. If it works as it should, you’re in the clear.

Otherwise, your iPad might warrant a trip to the doctor. Oh, and in case the iPad refuses to work correctly after you restart it, you should power it off right away instead of keeping it powered on.

Repair your iPadOS

Suppose the methods listed above for fixing overheating iPad work and your iPad’s temperature drops to an average level. In that case, it’s still entirely possible that your iPad might not work right. In these cases, repairing your iPad becomes a massive chore because Apple gives no warranties in the possibility of such damages. But there’s no need to worry even if this happens because we have quite the handy solution for this problem. You can get a tool that repairs your iPadOS by diagnosing all of its problems, and it can be a huge help if your iPadOS refuses to work correctly.

Now there are tons of such tools out there, and it can become quite daunting to choose the best one you can get for your money. And since we don’t want you to waste your money on a subpar product, we looked around and found the best iPadOS repair tool for your iPad. This tool is called Dr.Fone and is a product launched by Wondershare. It is one of the most comprehensive repair tools on the market, and you can’t go wrong with choosing this tool to repair your iPadOS.

Final words

Now that you’ve seen the reasons behind overheated iPads and how to fix overheating iPad, you can hopefully take care of this problem and get your iPad back in working condition. Remember to always backup your iPad data before you go around troubleshooting it for overheating. At the same time, if you do end up losing any precious data from your iPad, using a Data Recovery tool for the iPad is a sure-shot way to reclaim it.

Continuous usage of your iPad can sometimes lead to any software or hardware issues. These issues lead to a delay in the completion of our work, and it is obvious that we do not want these issues to happen.

One of the software issues which we will be talking about here is the freezing of the booting screen of the iPad. When the screen freezes, you only see the Apple logo on the boot screen, and the home screen does not appear.

Another thing that can happen is that the iPad starts booting again and again after the Apple logo appears on the screen. Let us see the reasons behind this and how you can fix this problem.

RELATED: The 13 Most Annoying iPadOS Problems and Their Solutions

Why is my iPad’s screen stuck on Apple logo?

One of the main reasons behind this issue can be some errors in the reboot process. When you reboot your iPad, and it starts turning on, the iPad completes some simple tasks such as turning on the processor, checking for the memory, and preparing the OS.

After the iPad turns on, all the processes start working, and you become capable of carrying out all your work on your iPad. If there is any issue in any of these processes, your iPad may get stuck on the Apple logo.

Another reason can be the negative effects of jailbreaking. If you have jailbroken your iPad, this issue may be due to that only as it is one of the negative impacts of jailbreaking.

Jailbreaking is the process in which a user modifies the iPad to remove the restrictions that are built into the iOS. After jailbreaking, your iPad becomes capable of many things that a normal iPad can not do, such as downloading any app outside of the app store and many more.

How to fix the Apple logo stuck on iPad’s screen?

There are a number of solutions to this problem. These include some common solutions, and there are some third-party apps such as Tenorshare ReiBoot, and many more.

Let us learn about all the solutions and their steps one by one.

Solution 1: force restart your iPad

One of the simplest solutions which you can try is forcefully restarting the iPad. Although it has a low success rate, a restart can surely help you get the device back to its original situation if there are only small problems.

To restart the iPad without a Home button, follow these steps:

Step 1: Press the volume button closest to the top button and release it quickly.

Step 2: Press the volume button farthest from the top button and release it quickly.

Step 3: Press the top button and hold it until the device begins restarting.

To restart the iPad with a Home button, follow these steps:

Step 1: Press and hold the Home button and the Top button simultaneously.

Step 2: Wait until the Apple logo appears once again and the iPad starts working.

As mentioned earlier, this solution has a low success rate, so your iPad may still be in that condition. In that case, you can try other solutions mentioned below.

RELATED: iPad Home Button Not Working? Here’s How to Fix It

Solution 2: put your iPad on charging

Sometimes the problem may arise due to the low charge of your iPad. In that case, you can simply put the iPad to charge and wait for it to get fully charged.

Before putting it to charge, check the lightning cable to see if it is working properly, and check the charging port for any dust particles.

After the iPad gets fully charged, try restarting it again by using the methods mentioned above and checking if it is working properly as before.

Solution 3: restore using iTunes or Catalina

If you have a MacBook, you can use the Catalina, and if you have a Windows PC, you can use iTunes by logging in using your Apple ID.

The steps to restore are as follows:

Step 1: Connect your iPad to a PC.

Step 2: If you are using a MacBook, open Finder in Catalina, and if you are using a Windows PC, open iTunes.

Step 3: Locate the iPad on your computer.

Step 4: Let the iPad be connected to the PC. During that time, follow these steps on your iPad:

• Press and hold the Home button if your iPad has a Home button.
• If your iPad does not have a Home button, press the volume button closest to the top button and release it quickly.

Again, press the volume button farthest from the top button and release it quickly.

Press the top button and hold it until the iPad starts restarting.

Step 5: Keep holding the button/ buttons until the Recovery Mode is visible on the screen.

Step 6: A dialogue box appears asking you to Restore or Update your iPad. Choose the Update option.

Step 7: Your PC will download the software for your iPad. If it takes more than 15 minutes, the iPad will exit the recovery mode, and you will have to repeat the above steps again to enter the recovery mode.

Solution 4: restore the iPad by putting it into DFU mode

Another method by which you can fix the problem is by using the DFU mode. I advise you to enter the DFU mode only if you have a backup of your data on the iPad.

When your iPad enters the DFU mode, all the controlling codes of your iPad’s software and hardware get erased and reloaded like new. Hence, there is a risk of data loss.

To put your device into DFU mode, follow these steps:

Step 1: Connect your iPad to your PC and launch iTunes on your PC or Mac.

Step 2: Follow the steps mentioned below to activate the DFU mode for iPad with and without the Home button, respectively.

For iPad with Home button:

• Power off your iPad.
• Press and hold the on/off button for three seconds.
• Press and hold the Home button while you are still holding the on/off button.
• Keep holding both of the buttons for ten seconds. Then release the on/off button but keep holding the Home button for about five seconds.

If the screen stays black, the iPad is in DFU mode.

For iPad without a Home button:

• Press the volume up button and release it, then press the volume down button and release it.
• Press and hold the Power button until the power off slider appears. Drag the slider to power off.
• Press the Power button and hold it for three seconds, and press and hold the volume down button simultaneously.
• Continue holding both the buttons for about ten seconds. If the screen remains black, the iPad is in DFU mode.

After the iPad gets into DFU mode, iTunes will ask you to restore your iPad. Select the restore option to restore your iPad.

Solution 5: Tenorshare ReiBoot

The use of iPad is very diverse. It can be used by an office professional and at the same time by a university student. Plus, you can also use it for various works such as preparing a presentation, taking notes, enjoying multimedia, and many more. So, you’re sure to be worried if your iPad gets stuck on the Apple logo.

This is one of the best third-party applications that can be used to restart and recover the iPad/iPhone to its normal condition without any data loss. You can simply download it from the internet, and instead of connecting to iTunes, you can connect to ReiBoot to restore your iPad.

Some of the features of ReiBoot are:

• It recovers the iPad / iPhone from Boot Loop and Black Screen.
• It helps to Exit and Recover from the Recovery / DFU mode.
• It helps to reset the iPad / iPhone in just one click without even entering the password.
• It also helps the phone to recover from the Apple Loop in which the Apple logo is stuck on the screen.
• It can solve the problems of all iOS devices running on any version.

Let us now see the steps on how you can use the Tenorshare ReiBoot to fix the problem:

Step 1: Download and Install the Tenorshare ReiBoot on your PC or Mac.

Step 2: Make sure that your iPad is in recovery mode.

Step 3: Now go to the Repair Operating System option and click on it.

Step 4: A new window opens, and a message showing the issue “Stuck On Apple Logo” is displayed on the screen.

Step 5: Click on the Fix Now button. A new window opens up and provides you with the latest firmware update.

Step 6: Click on the Download button.

Step 7: Once the firmware is downloaded, click on the Repair Now button, and a progress bar will reflect the entire process.

After some time, it will show a message as “The Repair Process is Completed.”

Now, you can see that the iPad turns on, and the lock screen is visible. You can simply enter the password, and there you go. The iPad is ready to use.

Availability and pricing

It is available on all the systems running on Windows 7, Windows 8/8.1, Windows 10, and Windows 11.

A free trial version of Tenorshare ReiBoot is available, but you can not repair your device using the free version. The repair feature is available for paid version only. The paid version is available for one PC and five devices. The description of the paid version is as follows:

• $29.95 per month user license.
• $35.95 per year user license.
• $ 59.95-lifetime user license.

RELATED: Top iPad Data Recovery Software for Mac and Windows (Free and Paid)

Conclusion

If your iPad’s screen is stuck on the Apple logo and is not getting fixed, you can surely try the solutions mentioned above and fix the problem.

The Tenorshare ReiBoot is the best solution out of all the solutions, and it is an all-around package for all types of problem solvers. If you have several iOS devices in your home, you can experience and feel the difference that this app makes.

The iPadOS 15.4 version is improved on iPad Air 5, but there’s a long way before Apple fixes every issue. When the initial bugs were discovered, Apple updated the iPad Pro 2021 with bug fixes. We might even move straight to iPadOS 16 by then. In the meantime, we can help you with specific iPadOS 15 problems and their solutions.

13 most annoying iPadOS 15 problems and solutions

#1 Storage Full Error

If your iPad storage is close to complete, a notification alerts you of the situation. They will advise you to not download anything else unless you get rid of unimportant materials.

On the iPadOS 15, though, these storage full alert messages are arriving even if there’s plenty of space in your cloud. Some users have gone through the trouble of cleaning the storage and still continue to receive this message.

One way of getting rid of this issue is by waiting  for the latest software update to reach your Phone. Once you download the bug fixes and restart your iPad, this issue should disappear. In fact, those with iPadOS 15.4 don’t seem to have this trouble.

In case you need more help, click here and dedicate a few minutes to reading the guide on cleaning iPad storage.

#2 Battery Draining Too Fast

Not long after upgrading to the iPadOS 15.4, users have been experiencing rapid battery drain on their iPad. According to support, this isn’t a bug but rather normal behavior after a software update. It takes 48 hours before the apps get used to new software.

Yet, the 15.4.1 update had a fix for the battery drain not long after.

If you can’t upgrade to 15.4.1 yet, you might try conserving the battery via these methods.

• Tap open Settings.
• Look for General.
• Find Background App Refresh.
• Turn the toggle off on it.
• Swipe back.
• Find Privacy.
• Tap on it and scroll down to Location Services.
• Toggle it off.
• Again, go to Battery under Settings.
• Look for the most battery-draining apps.
• Tap on it. Turn off the permissions you could do without on those apps for the time being.
• This will limit their working, thus taking less of the battery.

We do have a detailed write-up on this particular issue, make you go through that one, once you’re done reading the other troubles iPadOS 15 users face.

#3 Joining by Phone Isn’t Working On Google Meet

If your iPad has the M1 chip, you’ve been pretty excited about using the center stage feature to get on video calls. If the iPadOS 15 update doesn’t let them join by Phone, that’s a bit of an impossibility.

The issue is mainly present in iPadOS 15.4 and later versions. Some tried to delete Google Meet and install it again to see if the Join by phone feature worked. Unfortunately, the results were negative. However, this issue does have a fix.

Join the Apple Calendar to the Google Calendar account. Users have been reportedly successful in joining by Phone with this mini workaround.

#4 Wi-Fi Related Issues

The latest iPad models promised high-speed Wi-Fi. Yet, the iPadOS 15 bugs don’t allow Apple to stick to its promises. You have probably noticed the slow loading time for YouTube videos or experienced the Wi-Fi disconnecting at random.

One of those cases seems to be fixed with a reset.

• Open Settings.
• Tap on Wi-Fi.
• Turn the toggle off for Wi-Fi.
• Now, look for the connected modem or router name. Tap on the ‘i’ button next to it.
• Select Forget this Network that appears at the top. You will need to input your Wi-Fi password again, so have it ready somewhere.
• Turn the toggle on for Wi-Fi.
• Search for your router connection. Once you find it, tap on it and fill in the password.

If this doesn’t help, resetting the entire Network setting could provide relief:

• Find General from Settings.
• Scroll down to Reset.
• Inside Reset, there will be Reset Network Settings.

You will have to reconnect with every cellular or Wi-Fi network you have used after this hard Reset.

The same method applies to cellular and Bluetooth issues.

#5 Unresponsive Touchscreen

Considering we operate our iPhones and iPads primarily through touch, an unresponsive touchscreen is a different nightmare. It’s a weird issue where you can tap on Settings one second but can’t get into the General options no matter how many times you tap on it.

For iPads without a home button, it’s even more of a nightmare.

Until Apple releases a bug fix, the only thing you can do is force a restart.

• Press the volume up button once.
• Press the volume down button next.
• Hold the power button until the Apple logo pops up.
• For iPads with the home button, you have to press the power and home button simultaneously until you see the Apple logo.

You can restore your device entirely too. This will take your iPad to factory settings. So, if you have any essential items stored, backup your device on iTunes/ Finder.

Related:

• iPad Home Button Not Working? Here’s How to Fix It
• How to Fix iPad Black Screen (11 Ways)
• How to Fix a Frozen iPad – Everything You Need to Know

#6 No Sound on Some Apps

Instagram and YouTube are those given, commonly used apps for everyone. Imagine our surprise when we found out the latest iPadOS 15 updates have been cutting off the sound on them. Or worse, the sound freezes at odd moments and then comes back.

Fortunately, most users reported fixing the issue with basic activities.

• Go to the App Store.
• Tap on your Profile icon.
• Either hit update all for the apps. Or, click on each app and hit update. Ultimately, every app you download from the App store should be updated.

If the sound problem doesn’t solve after the update, delete and reinstall the app.

To delete the app:

• Press and hold on to the app icon.
• Tap on Remove App from the options.
• Select the Delete App option under it.
• Open App Store. Search for the app with the sound issue.
• Tap on Install.

#7 Unable to Receive or Make Calls On FaceTime

Oddly enough, most of the bugs with iPadOS 15 appear to be centered around video and sound issues.

Some people can’t make calls on FaceTime no matter how many times they press the green call icon. Others can’t seem to receive any calls. The last thing we want to do is miss out on talking to a loved one because FaceTime won’t work.

Sometimes, it’s the cellular data that are unable to take the load of FaceTime. Turn off cellular data by:

• Press the Settings icon.
• Look for Cellular.
• Scroll down and look for FaceTime.
• Turn the toggle on for FaceTime if it’s off.

FaceTime should be turned on your iPad to work over Wi-Fi.

• Tap on Settings.
• Select FaceTime.
• Is there a pop-up with the message ‘Waiting for activation’? If so, turn the toggle off for FaceTime.
• Restart your iPad.
• Go back into FaceTime settings. Turn the toggle back on.

If any of these hacks doesn’t fix your FaceTime issue, the only thing you can do is wait for a new software update.

#8 Wrong Email Notification Sound

If your work involves constantly replying to and sending emails, you are a fan of the email notification sound feature. When your iPad lets you know you have received an email with an audible sound.

Usually, you can choose a specific sound for email notifications. This way, you don’t mistake it with the message sound. Yet, some users have been receiving the Apple standard alert sound for emails after changing it.

It’s not a big issue, but it’s definitely annoying.

What can you do?

For most people, a restart seems to put things in order. After restarting, the notifications appear with the sounds you chose again.

#9 Can’t Turn off Read Receipts

The read receipts feature in messages effectively keeps track of who is ignoring you and who can’t wait to reply before you’ve hit send. A timestamp with the exact second they clicked open your message makes you anticipate their reply.

The downside of this feature is that the receiver gets receipts for when you read their message. The only way to not let them know is to turn off read receipts. Nor you or the other party would be able to get a peak on when a message is read this way.

Here is how you can turn it off:

• Go to Settings on your iPad.
• Find Messages.
• Turn the toggle off for the Send Read Receipts.

However, after upgrading to the iPadOS 15, people reported that their read receipt is still on even after turning off the feature. The receiver of their text has informed them off, taking away the sender’s chance to quietly read the message and go about the day instead of hitting reply.

Unfortunately, this is a bug with no known solution. Some people have reported that restarting the device fixes the issue temporarily but persists after some time.

Related: How to Recover Deleted Text Messages on iPad (and iPhone)

#10 Apple Map Keeps Crashing

Now, you probably are not using your iPad to navigate the streets. You would instead use your iPhone for those purposes. However, the iPadOS 15 appears to have dealt some odd damages to the Apple map.

So, whether you are using Apple Maps on your iPhone or iPad, you notice the number of times it keeps crashing.

The OS 15 also came with many beautiful features for the Apple Maps. This is the crux of the issue. At present, you should simply close the app. Try opening it again.

If that doesn’t work, force stop the app. Press on the app until you see the I icon. You will find the force stop option once you open it.

Then, tap open the app again.

If even that doesn’t help, restarting your iPad is in order.

#11 Gboard Crashes While Searching for Emoji

One of Google’s apps, Gboard, is a popular keyboard despite not being the default app for many Apple devices. Users can search for emojis, and GIFs, change languages, use predictive text, and even Google search directly for the keyboard.

The iPadOS 15 upgrades have somehow caused the Gboard to crash every time you tap on an emoji or use the search to look for GIFs or stickers.

The users have come up with temporary fixes such as:

• Tap on Settings.
• Scroll down to Keyboard.
• Tap on Keyboards under it.
• Find Gboard.
• Turn off the toggle to Allow full access.

#12 Siri Shortcut Notification

Users have been seeing this notification “Allow to share data with (null)?” every time they use Siri Shortcut.

This is more annoying than a big issue. However, the point of using Siri Shortcut is to allow the use of data without giving permission every time.

What can you do?

• Change the Siri prompt for the Shortcut to something that cannot be read easily. For Example, turn Siri, read mode to Siri, rdmd.
• Change the name of the original Shortcut too.
• Make a new Shortcut. Make it run the renamed version of the original Shortcut.

Related:

• iPad’s Magic Keyboard Walkthrough and Shortcuts
• How to Create Keyboard Shortcuts on iPad for Typing Faster

#13 Carplay Not Working with Music Apps

It’s safe to say the only time we listen to music on our iPad or iPhone is when we’re in the car. Imagine the surprise of iPad users when they couldn’t connect their car system to Spotify, Apple Music or Amazon after the update.

Now, it’s debatable whether it’s because of compatibility issues with your car or a genuine mishap on Apple’s part with the update. However, if it’s a problem on their end, they will release an update with fixes soon.

In the meantime, you can:

• Head to Settings.
• Find Music.
• Tap on EQ in it.
• Toggle it off.

If the problem persists, pull over somewhere and turn off the carplay. Restart your car and see if it works.

Update the carplay app.

If you use USB to connect to carplay, check it’s a compatible version. If you use wireless connection, check your Bluetooth and Wi-Fi is turned on.

As a last measure, check there isn’t a permission issue.

• Open Settings.
• Look for Screen Time.
• Tap on Content & Privacy Restrictions.
• Press on Allowed Apps.
• Check the toggle for Carplay is on. If not, turn it on.

Final words

The first round of OS updates from Apple always leads to some significant bugs. Thankfully, Apple is usually quick to fix those. But until they bring the latest bug fix updates to your Phone, we hope our guide on 13 iPadOS 15 problems and solutions could help you out.

Coming from the home of Apple, the iPad is well known for offering seamless services. However, just like other elements in the tech sphere, the iPad isn’t far from issues. As reported by many, the iPad can occasionally get stuck to something popular as the Black Screen of Death.

Because the situation forces you into a condition where you are unable to utilize the device, encountering frustration and troubles starts becoming a usual experience. This leaves many users wondering what causes the iPad’s black screen error or the screen of death. At the same time, seeking for the fixes is a common practice.

Read all the way through, and you’ll learn everything from probable reasons to possible fixes.

Factors that cause the iPad black screen of death

The reasons for this can range from physical damage that usually results from dropping the smartphone to insane software havoc like a failed jailbreak attempt, a broken hardware component, or a software issue.

You should not give up if the screen of your device goes black and entirely unresponsive. There are a few efficient techniques to fix it and get your device back up and running. Even if you’ve got your iPad running the latest iPadOS 15, you can still fix the issue using the methods on this page. This issue might arise due to a wide variety of factors. The following are some possible factors that hold the responsibility for the iPad black screen:

• It’s possible that there ins’t anything major, rather the issue to blame is a minor one. For instance, suppose you’ve got the brightness level of your device’s screen to something way too low, resulting in a black screen on your iPad.
• Your iPad’s battery may be dead, and the device may have shut off.
• The iPad black screen of death is sometimes triggered by an application or program crash, especially when the similar situation is encountered either during or right after upgrading the device to iPadOS 15.
• In the case of hardware issues, such as the 2019 iPad Air, Apple will assist users in fixing them for free.
• A faulty screen or any other damaged component can also cause this problem.

Now, let’s have a look at several potential iPad black screen/iPad blank screen of death fixes.

11 ways to resolve the iPad black screen issue

If your iPad looks to be stuck on a black screen and isn’t responding to touch, try one of the many solutions available to get it back up and running.

Solution 1: Charge your iPad for a while

If your iPad has a black screen, it is possible that the battery has run out of power. The iPad does not have enough power to display the charging symbol if the battery is too low to support a low-battery notification. Allow the iPad to charge for at least 20 minutes, preferably overnight.

The battery in the iPad is larger than that in the iPhone. It is very crucial to inhabit the practice of charging the iPad with a 10-watt or 12-watt charger, or it will take a long time to charge completely. If the battery no longer holds a charge as well as it once did, consider changing the iPad’s battery.

Note: The iPad will not charge if it is too hot or too cold. If the iPad has been in freezing or heated temperatures for a long time, bring it to room temperature before plugging it back into the charger.

Solution 2: Get the brightness of your device turned up

When you place your iPad near a bright light source, the screen will seem black. A low brightness level also obscures the screen. If Siri is enabled, ask it to increase the screen brightness. Alternately, go to a dark room and increase the screen brightness:

• To increase the brightness, swipe up on the bottom menu and drag the brightness slider.
• To reach the screen brightness settings on iPadOS 13, go down to the upper-right menu and change the brightness.

Solution 3: Check if everything is fine with the charging port

The iPad back screen can occur when the charging point is unclean, and the device does not receive a full charge. There could be dust or dirt inside the port. Dirt and dust are trapped in the charging port every time you plug it into the device.

• Dislodge the dust with a non-metal object, such as a wooden toothpick
• Then charge the device again.

Solution 4: Get your iPad charged with a certified USB cable

Another thing to look for if your device has a dark screen is the USB cord and charger you’re using. There are indeed several non-certified cables available which do not even operate properly, rather offer harm. They may even include a plug-in virus, resulting in your device not charging.

Solution 5: “Burp” your iPad

Burping the iPad, according to some forum members, realigns internal wires that aren’t correctly connecting.

To burp an iPad:

• Shut down the iPad.
• Use a towel to cover the front and back of the iPad.
• For at least a minute, pat the back of the iPad as if you were burping a baby.
• Remove the iPad.
• Switch on your iPad.

If this technique resolves the issue, the iPad suffers a hardware problem that will most likely reoccur. Consider bringing your iPad to the Apple Store for service.

Solution 6: Check if force restarting the device helps

A blank screen on an iPad usually indicates that the concerned device has actually got struck on the particular screen due to a software failure. This most of the time gets easily resolved by employing the force restart action. What it does is closes all active apps, including the problematic ones. The hard reset is extremely simple, although the procedure varies according to the device you’re operating on.

Follow these simple instructions to restart your iPad.

iPads with a Home Button:

• Hold your iPad’s Home and Power buttons together until you see the strong>Apple logo appearing on the screen.

iPads that don’t Feature Home buttons:

• Simply hold the Volume Up and also the Volume Down buttons together.
• After that, you’ll need to press the dedicated Power button on your device’s top. Keep your finger on the button until your screen loads up the Apple logo.

Related: iPad Home Button Not Working? Here’s How to Fix It

Solution 7: Update iPadOS

If you’ve tried all of the above solutions and your iPad screen is still dark, you should try a system update. You will need a computer with the most recent version of iTunes installed.

To update your iPadOS:

• Connect the iPad charger to the iPad before connecting it to the PC.
• Launch the iTunes utility on your PC. Long press and hold down the Home and the Sleep/Wake buttons on your iPad.
• Keep both buttons pushed even if after the Apple logo makes an appearance on the screen to enter Recovery Mode on your iPad.
• When the choice to Restore or Update appears on the screen, select Update.
• When you select Update, iTunes will update iOS without deleting your data.
• After a few minutes, the device will restart, and you will be ready to go!

Related: How to Upgrade to (and Downgrade from) the iPadOS.

Solution 8: Restore iPadOS

What should you do if your iPad screen goes black after installing an iPadOS update? Don’t be concerned. It isn’t the end of the world, though. Whether it’s a failed update or an outdated software version that’s causing the iPad’s black screen, you can fix it by getting inside the recovery mode and then restoring it.

A system restore is your last option because it erases all the existing data sitting on the iPad. If you’ve backed up your data to the cloud, then you’re at the safe end as all your data could get easily reinstalled if the restore was successful.

Do you need help with iPad backups? Well then, make sure to pay a visit here after you’re done getting your device’s screen back to the normal terms.

To restore your iPadOS:

• Connect your iPad to your PC via USB cable and launch iTunes or Finder.
• You must now put the iPad into Recovery Mode. Depending on your iPad model, proceed with the procedures below.
  • On an iPad that features a Home button, hold both the Home and Power buttons simultaneously. When you see the recovery mode screen popping up, let go of both.
  • On an iPad with Face ID, press and immediately release the Volume Up and Volume Down buttons. Keep your finger holding the Power button until you see the recovery-mode screen.
• When the option to Restore or Update appears, select Restore.

Solution 9: Try DFU restoration to resolve iPad black screen of death

Few people are aware of the iPad or iPhone’s DFU (Device Firmware Upgrade) mode. It is the most extensive type of restore. It allows you to restore the device from any state and thereby resolve numerous deeply concealed software issues.

If possible, make a backup of your files before restoring from DFU mode, as restoring from DFU mode erases all of the device’s content.

The procedure for placing the concerned iPad into the DFU mode varies from one to the other.

Follow these steps to put your iPad with a Home button into DFU mode:

• Connect your device to your computer via a lightning cable.
• Open iTunes or look for the Finder utility, the one which is installed on your computer.
• Then, simultaneously press the Power together with the Home buttons. Continue holding the press until the screen blacks out.
• Wait for a few seconds, and take your fingers off the Power button. Make sure you do that while still holding down the Home button.
• Continue pressing the Home button till you notice your device gets recognized by iTunes/Finder.

Follow these steps to put your iPad (with Face ID) into DFU mode:

• Start by verifying that your gadget is actually connected to your PC.
• Simultaneously tap the Volume Up button and Volume Down utton. Keep it pressing together with the Side button until the screen goes black.
• As soon as it happens, locate, hold down the Volume Down button. Do that without releasing the Power button. Hold it for around 6 seconds (you must apply pressure to both of them)
• After that, go ahead and release the hold. However, you’ll need to continue pressing the Volume Down button. Do it for around 5 seconds.
• Your device will then get automatically recognized by the iTunes/Finder application that is currently operating on your computer.

You will now notice a window on your computer requesting that you restore the device before using it. To complete the operation, click OK>Restore iPad.

Solution 10: Use Tenorshare Reiboot app to fix iPad system

If you are concerned about data loss, there is an alternative method. You may always use Tenorshare ReiBoot – the iOS System Recovery utility to fix “iPad screen goes black.”

Follow these steps to use ReiBoot

• On your computer, download and install “Tenorshare ReiBoot – iOS System Recovery.” Connect your device to the computer via a USB cord as soon as you’ve installed the software. Press the “Start” button.
• Now choose and click on the “Standard Repair” option to access the firmware download screen.
• The program will display the most recent firmware package for the current iOS version that your device is running. If you do not already have it on your PC, click “Download” to begin the installation process.
• When the download is finished, click the “Start Standard Repair” option to begin device recovery. When the procedure is finished, your device will restart normally.

Related: Top 7 Tools to Repair iPadOS System Problems (Works with iOS too)

Solution 11: Contact the nearest Apple support

Didn’t any of the solutions above work? A hardware problem could be causing you to be stuck on the disturbing black screen error. Water damage to your logic board could possibly be bringing all the trouble. Depending on the terms of your device’s warranty, the Apple Store on your locality should be able to resolve the problem once and for all and that too free of cost.

Conclusion

An iPad blank screen can be terrifying to confront. However, the problem isn’t as serious as many consider it to be. There are indeed multiple ways to resolve the issue. Go ahead and try all the solutions listed above. But in case you want to have a simplified approach, opt for the “Tenorshare ReiBoot – iOS System Recovery.” It is the simplest known solution to the black screen problem with no data loss.

FAQs

Q1. Why is my iPad screen black?

A software crash frequently causes your iPad screen to go black. Your iPad is frequently still turned on and functioning in the background! If your iPad has a software crash, a hard reset can temporarily resolve the issue.

Q2. How to reset my iPad while having my data safe?

Factory resetting your iPad is indeed a great way will help you solve a variety of problems, including the one we’re discussing here. But, a factory reset will result in data loss. In this case, the “Tenorshare ReiBoot – iOS System Recovery” app provides the best roof to take shelter underneath. It can reset your iPad without data loss.

Q3. How do you reset an unresponsive iPad?

If your iPad is stuck and unresponsive, or if it is too slow to use, try restarting it. Hold down the Home and Power buttons simultaneously on iPads with a Home Button until you see the Apple logo appear.

For iPads lacking Home buttons, simply hold the Volume Up alongside the Volume Down buttons. Then, at the top of your device, tap the Power button. Hold it down and maintain the position until you see the Apple logo on the screen.

When your iPad’s Home button stops working or becomes unresponsive, it may be a very frustrating and unpleasant experience. As it is the single button that performs multiple functions, it is important to the device’s proper usability. Many people complain that the iPad’s Home button does not work either after owing it for several years, or even right out of the box. Aside from the screen, the iPad Home button on the older devices is the most used part of the device, so it must work well.

When you have problems with any gadget, the first thing you would look for is “do-it-yourself” fixes. So, in order to help users whose iPad Home button isn’t working and who are looking for DIY fixes before sending it to the Apple shop, we have listed numerous fixes to the iPad Home button not working issue below.

[ Related: M1 iPad Pro 12.9 Battery Draining Fast? Here’s the Fix ]

Why is my iPad home button not working?

Home buttons on iPads may not work correctly for a variety of reasons. Physical buttons on older iPad models can wear out over time. Moreover, an iPad Home button problem causes the sensor to stop working after a period of heavy usage and time.

One solution is to change the button, which requires you to disassemble the device. We would not recommend doing this procedure on your own, especially if you have never done it before and your device is still under warranty. We’d want to provide some alternative, simpler solutions that are highly effective. Check out these fixes for an unresponsive iPad Home button. Let’s look at how you can solve the problem on your own.

How to fix an iPad home button that isn’t working

Before we begin, it is important to note that these fixes work with any iPad, iPhone, or iPod touch that has a Home button. If your iPad or iPhone’s Home button isn’t working, you can use the steps below to fix it.

Solution 1: Take-off iPad Case

Although unlikely, it’s possible that your iPad Home button isn’t working because your iPad’s case prevents you from pressing it all the way down. Remove your iPad’s case and press the Home button again. If it still does not work, move to the next step!

[ Related: Best iPad Pro Leather Cases ]

Solution 2: Clean the Home Button

It’s possible that minor problems, like dust, caused your home button to stop working. And in this case, you must first check whether there is too much dirt for the home button to work properly. Because of the sticky hands, the button could become clogged with dirt, sweat, and moisture. You should try to clean up the dust that has gathered around the Home button. It is best to use isopropyl alcohol with a concentration of 99% while cleaning.

• The first step is to turn off the iOS device and apply 2-3 drops of isopropyl alcohol to the damaged area with a cotton swab.
• Next, using a cotton swab, remove all dirt from the home button.

The intention of using alcohol is to melt dirt, pollutants, or any other type of grime. The cotton will primarily serve as a remover and cleaner. We recommend that you wait at least 30 minutes before beginning to work with the iPhone, as you cannot turn it on while it is partly wet. After that, check to see whether your iPhone or iPad’s home button is working.

Solution 3: Restart iPad

If a minor software error is causing the problem of the home button not working, simply switch off and restart the iPad device. To do this, follow the steps given below:

• To begin, press and hold the power button on your iPad until the “slide to power off” slider shows on the screen. If you slide this to the right, your iPad will turn off.
• Press and hold the power button until the Apple logo shows on your Apple iPad device.

Solution 4: Reset All Settings on iPad

You can even try resetting all of your iPad’s settings to fix this problem. Before you begin, make a backup of all the data on your iPad so that you don’t end up permanently losing some important files and folders!

By following the steps below, you can restore your iPad to its original factory settings:

• Go to the “Settings” option from the home screen and select “General” settings from the available options.
• Tap the “Reset” option, then the “Reset All Settings” option.

Solution 5: Change the Home Button Click Speed

Adjusting the click speed of the Home button is not a sure solution. But it has helped in certain cases where the button was not working.

To change the speed of the Home button click, follow the steps below:

• Go to the iOS device’s settings.
• Scroll down and click on “Accessibility.”
• Click on “Home Button.”
• Choose any other option you want.
• Restart your iPad now. Check to see if the Home Button works after the device has booted.

Solution 6: Put Your iPad In DFU Mode

DFU mode, also known as Device Firmware Upgrade mode, is capable of resolving a variety of bugs and software difficulties. However, you cannot access DFU mode if the Home button is not pressed. Some apps, such as Redsn0w, Recboot, ReiBoot, and others, can help you.

Connect your iPad to the most recent version of iTunes after entering DFU mode. Then, in DFU mode, restore your iPad. Check to see if your iPad’s Home button is now functioning.

Please keep in mind that doing so will erase all personal data and settings on your iPad. So make a backup of your iOS device first.

Solution 7: Update the iPad

Updating the operating system may help in the repair of the Home button. Try updating to the most recent version and seeing if the button works again.

To update your iPad, follow the steps below:

• Go to the “Settings” app.
• Then go to the “General” options.
• Select “Software Update.”
• Let your device check for updates. If any are found, at the bottom, click “Download and Install.”

If no new updates are available, or if the Home button still does not work after the update, proceed to the next step.

[ Related: How to Upgrade to (and Downgrade from) the latest iPadOS Safely ]

Solution 8: Enable AssistiveTouch

If the Home button isn’t working, enable AssistiveTouch. It’s a virtual home button that appears on the screen and includes all of the features of the Home button as well as some extras.

Follow the steps below to enable AssistiveTouch:

• Go to “Settings.”
• Scroll down a little and select “Accessibility.”
• Then, press the “Touch” option.
• Select “AssistiveTouch.”
• To activate it, slide the slider next to “AssistiveTouch.”

You can use the button as a Home button when it shows on the screen. Use it as a temporary fix until you can repair the Home button or purchase a new device.

Solution 9: Press the Home Button with your Charger

A fragile cable near the charging port links the Home button to other components inside your iPhone. Some individuals have reported that applying a small amount of pressure in this location fixed their Home button, probably because doing so reconnected the cable.

To try it, simply follow these simple steps:

• Connect your device to the charging cable that came with it.
• Gently press on the back of the connector towards the bottom of your iPad, as if pushing it toward the Home button.
• Hold that pressure while clicking the Home button a few times.

[ Related: Wireless Chargers for iPad – Everything You Need to Know ]

Solution 10: Enable 5-Finger Gesture

If the above methods did not resolve the issue with the iPad Home button, you can try using gesture control to mimic the action that the Home button performs:

• Open “Settings.”
• Turn on “Multitasking Gestures.”
• To return to the Home screen, spread your hand out and place five fingers on the screen, pinching all five fingers in – grab them all together.

Solution 11: Use Tenorshare ReiBoot App

Is your iPad’s home button broken and not working? For some reason, do you need to access the Recovery Mode? Don’t be concerned. Tenorshare ReiBoot App allows you to reboot into recovery mode on your iPad without using the Home button.

Let’s have a look at how to enter recovery mode without using the Home button:

• You install the Reiboot software on your computer after downloading it from the link below.

After the installation is complete, simply click the software to start.

• Connect your device to your computer using a compatible cable.
• To enter or exit Recovery Mode on your iPad, press the ‘Enter/Exit Recovery Mode’ option.

When you press the ‘Enter’ option, your device will enter Recovery Mode. Your device will be rebooted into Recovery Mode in 1 minute.

Related: Top 7 Tools to Repair iPadOS System Problems (Works with iOS too)

Solution 12: Still Need Help? Contact Apple

If nothing works, you must contact Apple customer service for help. Please check if your iPad is still under warranty. If so, you can get it serviced for free. But if it does not fall under the warranty period, you will have to pay a fee to have the repairs done. They will replace the hardware on your iPad, and then the home button on your iPad will work properly.

Conclusion

Without a doubt, the iPad Home button not working issue can cause worries if you are totally dependent on your iPad, as you depend on the home button to accomplish a variety of functions. However, if the iPad Home button does not respond, you can follow the methods described above. This article contains all of the possible solutions to the home button problem. Did you find a new solution to the iPad home button not working problem? Please leave your thoughts or any other solutions in the comments section.

FAQ

Q1: Where is my iPad’s Home button?

Beginning in 2018, Apple gradually removed the Home button on iPad Pros, followed by the iPad Air and iPad mini. As of 2021, only the entry-level iPad has a physical Home button. You can still do everything you used to do with the Home button, only in a different way.

Q2: How do you take a screenshot on an iPad that doesn’t have a Home button?

Even if your iPad lacks a Home button, you can take a screenshot. Simply press the Power and Volume Up buttons at the same time until you hear the camera shutter click.

Q3: What should I do if my iPad’s Home button isn’t working?

If restarting your iPad hasn’t helped, it’s time to take it to an Apple Store or an Apple-authorized repair shop. In the meantime, use Assistive Touch to configure a workaround that will help you to use the iPad until it is repaired.

Quick notes come pre-installed on new devices, and old users will get the app with the latest iPadOS 15 updates.

The new app has many glitches and errors, and sometimes the Quick Notes do not even work. IPad users face some common problems with the Quick Notes in iPadOS 15, and here they are:

• After the update, users are unable to open the floating window by swiping up from the bottom right corner.
• The gesture location is not correctly designated, like there is no fixed place to swipe up.
• Flicking up on the home screen will open the Quick Notes on the interface instead of a floating window.
• Quick Notes is not responsive to Apple Pencil. Dragging up or clicking does not open the quick notes.

These are the four common issues that users are facing. So here are some reliable solutions to fix Quick Notes not working in iPad OS 15 easily.

How to fix quick notes not working?

Close the Notes App

The first fix that you must try is closing the notes app opened in the background. Closing the running Notes app can solve the problem.

• Open the Quick notes app.
• Then open the app switcher and simply remove the notes app by swiping up.

The process does not ensure 100% success, but we have seen it working in some instances.

Restart iPad

Restarting the device is not a solution to every issue, but it can be fruitful in this situation. To fix the Quick Notes not working problem, reboot your iPad.

• Hold the Power button until the Restart option comes on the screen.
• Click on the Restart option, and the device will restart.

These minor errors or glitches often get resolved after a reboot. So, use this few-second trick to solve your Quick Notes errors in an effortless way.

Force Restart iPad

If the iPad does not show the restart option or not restarting, you can force restart your device. It is not a tricky solution, and you will not have to toggle through various settings. The process is quite simple, but it is different for old and new devices because the new iPads don’t have the classic home button.

• On Old iPad models You will press and hold the Power and Home button together. Hold them for a few seconds and release them as soon as you see the Apple logo on the screen. The device will restart and will probably resolve the error.
• New iPad Models do not have the Home button. So, we have to use a different process to Force Restart the device. It is straightforward but slightly twisted. Firstly, press and rapidly release the Volume Up button. Repeat the process with the Volume Down button immediately. Then press and hold the Power button until the device restarts.

Check for Updates

Sometimes the device does not have the latest iPadOS or app version. So, you might need to install the latest OS and app version.

• For OS, head to the Settings and open the General tab.
• There, you will see the Software Update option; click on it.
• Clicking it will reveal the latest OS version; if you don’t have the latest one, update the device to its latest version to fix the problem.

There is a chance that the notes app is not up to date. To check,

• Visit the App Store, search Notes, and check for updates.
• If available, then install the update, and hopefully, it will resolve the issue.

Disable Quick Notes on iPad

After updating the app, OS, and using all the possible solutions, you need to disable the Quick Notes on your iPad if the issue is still there. Doing that is not complicated; follow these simple steps.

• Firstly, open the Settings app and scroll down to the Apple Pencil option.
• Open the Apple Pencil and click on the drop-down menu on the top right corner of the screen. Swiping up will show the Pencil Gesture option.
• In Pencil Gesture, you will see the Quick Notes option and disable it.  

Related: How to Retrieve iPad Notes Data from an iCloud backup?

Bonus fix: quick iPad system repair

The last process is repairing the iPad system. In this, you will use third-party software to repair your iPad through your PC or Mac. There are several services out there; the best one being Tenorshare ReiBoot. It is an affordable easy to use application with two repair modes. Standard and Deep.

Before starting the repair, ensure that your iPad data is backed up because all data will be erased after the repair.

Below are the easy steps to repair your system with Tenorshare ReiBoot.

Standard Repair

• Download and install the Tenorshare ReiBoot (official download link).
• Connect your iPad to the PC with the original iPad charging cable. Once the device is connected, click start to enter the software.
• Now click on the standard repair and make sure to give the lines a thorough read to remain safe from any misunderstanding. After reading click standard repair
• The device is connected, and you have selected the standard repair option. Now the Tenorshare ReiBoot will download the firmware. Click download and brew a cup of coffee because it’s a 5GB file.
• After firmware installation, Start Standard Repair. It will take some time so make sure that the mobile stay connected to the computer. After repair, the system will reboot, and all your data will be erased.

Deep Repair

Deep repair has a higher success rate than the standard repair, so we recommend using it.

The process is pretty similar. Just click on the Deep repair option instead of standard repair and follow the same steps to repair the iPad system.

FAQs

Why is Quick Notes not working on iPadOS 15?

There can be many reasons for Quick Notes not working on iPadOS 15, like operating system or app problems. Quick Notes is in its initial launch phase, so some glitches and errors stop the app from working. If you face similar issues, use the solutions mentioned above to fix the problem.

How to enable Quick Notes on iPad?

Swipe up from the bottom right corner of the screen using your finger or an Apple Pencil on the iPad. If you do not have it enabled, you will need to do that first. Add it to Control Center by heading to the Settings – Control Center, then choose Quick Note.

How to use Quick Notes with a Bluetooth keyboard?

If you’re using a Bluetooth keyboard or the Magic Keyboard for your iPad, then you can launch the Quick Note without touching the screen. Press the globe key + Q on your external keyboard, and the Quick Note will pop up in the bottom right corner of the screen.

Final words

Quick Notes not working is a common issue after the iPad OS 15 update. So, we have provided some tested methods that can resolve this problem. Moreover, Tenorshare ReiBoot is a reliable repair system and can fix almost every iPad OS 15 error and issue. 

After all, what’s better than streaming your favorite content after a long and tiring day? But what if your YouTube app doesn’t work? Are you frustrated about YouTube not loading on your iPad?  Many iPad users have run into a similar problem with their YouTube, and there is no one-way answer as to why YouTube would not work on your iPad. You could be facing single or multiple issues leading to this problem.

While it could be due to connectivity or software issues, sometimes it can have something to do with your device and its storage and settings. So let’s break these issues down into fragments to understand them better and resolve the problem you’re facing.

Related: Top 7 Tools to Repair iPadOS System Problems (Works with iOS too)

YouTube not loading on iPad? – Here are some Quick Fixes

There is no one-size-fits-all answer to this question. Such an issue can exist due to various problems, including your internet connection to some problems with your device. In a nutshell, you can try：

• Restarting your device or the YouTube App. This will fix any minor glitches.
• You also need to check for a stable internet connection; hence try toggling your Mobile Data or WiFi on and off. You can also use Airplane Mode for this. Also, make sure you’ve not run out of your data.
• Check for updates in both-Youtube App and your iPad OS. In case you find any updates, install them as they will support maximum optimization.
• Also, make sure that your iPad has enough free space to make sure YouTube can run smoothly. If not, try deleting some unnecessary files.  

Sometimes minor glitches in the app can hamper smooth functioning. If your app has been updated to date as well, you should try restarting your YouTube app, as it would probably fix those minor glitches. To restart the YouTube app, follow these steps-

• Go to the home screen of your iPad
• Now swipe from the bottom of your screen and pause in the middle. You should now be able to see all the apps that you’ve recently used that you haven’t closed as of yet.
• Locate YouTube and then swipe it up. This will close the app.
• Now, to restart the YouTube App, go to the home screen and click on the YouTube icon.

If the issue you were facing was due to a minor glitch, it should get fixed.

How to fix YouTube not working on iPad?

Here we have listed ten reasons and solutions for why your YouTube might not be working on your iPad. Typically, these solutions should be enough to fix the problem you’re facing.

1. Check if YouTube is down

Sometimes YouTube is shut down due to some maintenance that’s to be done from the company’s end. Such a shutdown is usually to fix some bugs and glitches on the app.

The best way to check it is to ask someone else if their YouTube seems to be working or not. If their YouTube is not working as well, it is probably down. You can also use Downdetector — a great webpage that keeps track of all other websites and their working conditions.

Note that this issue affects all devices, be it iOS or Android. If this is the case, then all you can do is wait for YouTube to be up again so that you can start using it again.

2. Check your internet connection

You are required to have a stable internet connection to use any app that runs online. Without an internet connection, you will only be able to stream downloaded videos on YouTube. To check if your internet is causing issues, try opening any other website on Safari or any other app that runs on the internet. If the website or the other app doesn’t load either, your internet probably has an issue. You can try resolving this issue by-

• Turning your Mobile Data Off and then turning it back On again.
• Ensure you are not out of your Mobile Data. You can also try asking someone who uses the same internet service provider if they’re able to use YouTube to confirm that the issue is from the side of your data provider or not.
• In case you’re using WiFi, try turning it Off and back On again. You can also forget the WiFi network and connect back to it again by re-entering the password.

Hence, this should fix any basic problems with your internet connection.

3. Check content restrictions on your iPad

If your iPad was recently handled by someone else, there is a chance that the user accidentally changed some settings on your iPad, leading to restrictions on YouTube that have barred it from working now. For this, you’ll have to head to the settings menu to change Restrictions as per your need. For iPadOS 12 and above, you can follow these steps-

• Open Settings
• Click on the Screen Time option
• Go to Content and Privacy Restrictions followed by clicking on Content Restrictions
• Change the restrictions as per your need

Note: Remember to allow YouTube in the content restrictions settings.

4. Update the YouTube app

Another reason for your YouTube not working could be that you are currently using an outdated version of YouTube. Apps like YouTube release updates often to continuously adapt and improve as per the need of their users. To check whether the YouTube on your iPad is updated to-date or not, you can follow these steps

• Click on App Store
• Go to the Today tab at the bottom
• Click on the user profile located at the top-right corner. You should now be able to see your account’s details.
• Scroll down till you find YouTube and check if there is ‘update’ written next to it. In case there is, you can update YouTube by clicking on it.

5. Check your iPad’s storage and clear cache

Even though the storage on an iPad is quite generous, it can get filled up to the point it starts affecting the performance of your device. For example, if your iPad has been getting hanged often, or you’ve been having other issues with clicking photos with your camera and using other apps, there is a fair chance that your iPad’s storage is low.

To check if this really is the case, you can check the current storage of your device by following these steps-

• Go the Settings and click on General
• Click on iPad Storage

After following these steps, you should be able to see the available storage of your device. You must have an optimum amount of storage free for your YouTube and other Apps to be able to run smoothly. In case your memory is nearly full, try uninstalling some unwanted apps to free up some space. You can also try deleting unwanted photos, videos, and files to free up some storage. You can also clear the YouTube cache files.

Caches usually contain temporarily stored data meant to help your apps or websites load faster, although sometimes it can toll on your device’s memory. To clear them on your iPad:

• First click on the Settings button on your device and then on the General option
• Head to iPad Storage and keep on scrolling down till you see YouTube. Once you see it, click on it.
• Now, tap on the option that says Offload App. This will free up some storage that your YouTube has occupied on your device so far, including the cache.

This will relieve your iPad’s memory and should also help resolve some minor issues if you’ve faced any while using the app recently.

6. Re-install the YouTube app

If your device settings, storage, app updates, and internet connection are fine and YouTube is not down as well, you might want to try re-installing the app. Sometimes, specific files that help YouTube run smoothly can get corrupted, leading to YouTube not working anymore on your device. To Re-Install the app, you need to-

• Press and Hold the YouTube Icon on your iPad’s screen
• Select the Remove App option from the menu. This will uninstall your app.
• Head to the App Store and install YouTube from there once again.

7. Update iPadOS

Just like your YouTube App needs to be updated to the latest version to run smoothly, your issue with YouTube may exist because your iPad OS has not been updated to its latest version. Most apps would cater best to the latest versions of OS; hence it’s recommended that if there are any pending software updates, you get done with them. To do so, you can follow the steps given below

• Head to Settings followed by clicking on General
• Click on the Software Update option
• In case you see any Software Update available, install it.

This process might take a bit of time, and you should not restart your iPad while it’s updating the software as it might disrupt the process altogether.

8. Reset network settings

If you believe that your device has run into specific network issues, you can try and reset your iPad’s network settings to see if the problem is resolved. Please note that doing this will remove any saved network passwords you have on your device as well. For this, you can

• Go to Setting followed by General.
• Click on Reset followed by choosing the option of Reset Network Settings

9. Factory reset your iPad

This should be one of the last options you choose in case nothing else on this list works. If you’ve been facing other issues with your iPad along with YouTube not loading, this might help you resolve all your problems as well. Factory Reset will delete all data on your iPad, so you must back up all your essential files, documents, and passwords you need to save; otherwise, the data will be lost forever.

In case you want to try this method as well, you can follow these steps-

• Go to Settings followed by General
• Click on the Reset Option and then select Erase All Content and Settings option.
• Confirm your decision

With this method, you might need to update and install your Apps once again, and restoring the data you’ve backed up might take some time as well.

10. Re-sign into your Google account

Your YouTube account is created through your Google Account and is linked to it. Hence any issue with your Google Account can interfere with your YouTube Account as well. Depending on where you’re logged in, you’ll have to sign out from your Google Account either from your Safari Browser or your Gmail App. In both the cases, you’ll need to-

• Click on the profile photo that you see in the top-right corner.
• A menu will appear from which you need to choose the sign-out option.
• You can now try signing back into your account again and see if it fixed the issue.

Bonus fix tips

If you’re still struggling to get YouTube running smoothly, try the following fixes, and you might just solve the issue:

1. Fix iPadOS update or system issues

Assuming that none of the tips above have helped you use YouTube on your iPad, here’s a fix that can help you get back on track. AnyFix is a system recovery app that works with iOS and iPadOS devices and can help you repair 40+ iPad issues.

All you need to do is install the software, connect your iPad and run the “System Repair” tool. It will scan your iPad of all the issues and then help you with a quick solution. This works by re-installing the OS on your iPad, and hence, it cleans all the files and any errors that come with it.

So, if you have tried everything and YouTube still isn’t working, this is the only solution. However, do note that the repair process will clean all the data, and we recommend you make a backup of all the essential files beforehand.

2. Download youtube offline

Finally, if you don’t want to lose your data or don’t like the long process of cleaning your iPad to the factory settings and still want to watch YouTube, well, we have the solution for you. Download the YouTube videos offline and watch them on your iPad.

SYC2 or Softorino YouTube Converter 2 is an app that can help you download and convert all YouTube videos straight from your PC or Mac to your iPad. Just download the app, install it and search for the video you want to download. It’s as simple as that.

After finding the video you’re looking for, just click on the “Convert & Transfer to iPad” button. The video will be downloaded, converted to the proper format, and then transferred over to your device over a wired or wireless connection.

Final words

Above we’ve discussed several solutions to a single problem, and typically, these solutions should work to fix the problem relating to YouTube not loading on iPad. In addition, some of these solutions should also be able to fix any other minor issues that you’ve been facing with your YouTube App lately.

Overall, hopefully, these solutions should suffice, and your problem will be fixed in no time. So, rest assured and use the fixes above to enjoy the perfect YouTube experience on your portable iPad.

There are many reasons why your iPad is running slow. This guide will specifically focus on the software side of things. If you doubt that the problem might be internal then it is best to take your iPad to a repair store as they will have tools to analyze the problem better. Now that we got that out of the way, here’s the first thing you have to do.

[ Related: How to Fix a Frozen iPad – Everything You Need to Know ]

Why is my iPad slow?

The reason Apple brings out a brand-new iPad and iPhone every year is not just reap huge profits, but due to the growing demand of users for devices which are more powerful than the previous generation. The fact that the iPad Pro 2021 hosts the same M1 chipset that the latest line of MacBooks possess, gives you an idea how demanding some of the modern apps and web services can be.

The process-heavy apps and services can take a toll on the hardware of the iPad, occupying the RAM storage, and the available on-board memory too. However, there are some tried and tested ways that you can bring the iPad up to speed and enjoy the same experience you once did.

1. Slow loading and apps crashing – Reset your iPad

If the software on your iPad is being finicky, or apps aren’t working properly, you might think that it’s your iPad that’s lagging. Well, it is, but it doesn’t classify as a major issue that can be easily fixed with something as simple as a reset.  There are two kinds of resets, A soft reset, and a hard reset. 

Performing a soft reset

1. Press and hold the Sleep / Wake button (on the top right of your iPad). You will see a red arrow slider appear.
2. Tap on the slider and drag it to the right.
3. Your iPad will turn off.
4. After a few minutes, press the Sleep / Wake button again. Your iPad will turn back on.

The Apple logo will appear for a while and then your iPad’s home screen will appear.  

Performing a hard reset

1. Press and hold both the Sleep / Wake button and the home button simultaneously for 10-15 seconds.
2. You will see a red arrow slider appear.
3. Keep holding the Sleep / Wake and the home button.
4. The Apple logo will appear.
5. Release the buttons and your iPad will do a hard reset. It will shut down and restart.
6. After a while, the home screen will appear.

2. Not on the latest iPadOS? Update the Software

Irrespective of which iPad you have, a software update is very crucial to the longevity of your device. Let’s go through the process of how to update your device to the latest iPadOS, but there are a few things to consider before you update to the latest version.

Before updating you should enable automatic back-up in your device, or back up your data manually.

Remember to back up first!

When it comes to keeping your personal pictures, videos, contacts, and crucial work document safe, you need to make sure everything is securely backed up first. On the Apple iPad, you have the option to keep all of your important files secure by the minute by syncing it to iCloud, or physically back up files to Mac or Windows.

We have extensively covered the process of backing up your iPad, whether it is for a routine factory reset, or any other issue.

[ Read More: The Definitive Guide: How to Back Up Your iPad ]

Finally – update to thelatest iPadOS

Updating iPad automatically

1. Navigate to Settings – General – Software Updates – Automatic Updates.
2. Turn on Download iPadOS Updates and install iPadOS Updates

(When an update is available, your iPad will download and install it overnight while charging. You’ll be notified before the update is installed.)

Updating iPad manually

Go to Settings – General – Software Update.

The screen will show the currently installed version of iPadOS and whether an update is available.

Updating iPad using a computer

1. Connect your iPad to your computer with a cable.
2. You have two ways of going about doing this
3.  In the Finder sidebar on your Mac, select your iPad, then click General at the top of the window.
4. In the iTunes app on your Windows PC, Click the iPad button near the top left of the iTunes window, then click Summary.
5. Click on Check For Update.
6. To install an available update, click Update.

[ Related: How to Upgrade to (and Downgrade from) the iPadOS Safely ]

3. Too many junk files – clear cache

Clearing cache is the quickest way to make your iPad way snappier. Cache is basically the data that an app or browser stores in your device for quick access, to make its loading time and processing faster, but this also negatively impacts your iPads general performance. 

Slow web browsing? Clear cache in Safari

Clearing up the cache in Safari will not only make your iPad browsing experience smoother but will also get rid of unnecessary storage held up by the app. 

(Clearing Safari Cache does not delete your browser information or any saved passwords of any kind. There is also no risk of any of your important data getting wiped in the process.)

1. Navigate to the Settings menu and navigate to the accounts and passwords section.
2. Tap on the Safari icon.
3. Tap on the “Clear History and Website Data” setting.
4. A dialog box will pop up, tap “Clear history and data” to confirm the selection.
5. All the safari cache that’s been stored in your iPad will be deleted from your device.

There is a way to still keep your browsing history but delete the cookies-

[Cookies are small pieces of information that all websites store on your iPad. They only store a few bits of text, but over time depending on the number of websites you’ve visited, these cookies add up.]

1. Navigate to the Settings – Safari.
2. Go to the Advanced tab – Website data.
3. Tap to remove all the website data.
4. This way you rid your iPad of the cookies without even touching your browsing history.

Remove useless app data – Clear cache in apps

If you’re someone who has a number of apps installed on your iPad, you’ll probably also have a lot of cache stored on your device, from those before-mentioned apps. Now the process to reset data or to delete the cache is different. Most of the time, the developer will implement the means to do so in the setting. But for some apps, the feature isn’t available. We will have a workaround for those too.

For apps with the setting in-built.

1. Navigate to Settings – General.
2. Tap on iPad storage. (Here you’ll see all the apps on your iPad arranged according to the storage they occupy.)
3. Tap on the apps that are occupying the most space, or apps that shouldn’t occupy that much space that they already are. 
4. Navigate to Reset Cached Content, and tap it.

For apps with the setting, not built-in.

1. Navigate to Setting – General.
2. Tap on iPad storage.
3. Tap on the apps that are occupying the most space or you know that can’t have its data and cache reset.
4. Tap on document and data.
5. Tap on the delete app button to clear its data.

It is understandable that the task of cleaning cache can be cumbersome for most of you and to continue doing it indefinitely until your iPad breaks is a hectic task to take on. 

In this case, you can use a cache cleaner app to do the job for you. Be mindful while choosing which one though, as there is an influx of apps that claim to do it but are not fully capable. Try choosing one with a good rating or even better, a subscription. These will guarantee good performance and also increase the lifespan of your iPad.

4. Low on storage – Delete unnecessary apps

It is common knowledge that if your iPad’s storage is filled, it will start acting strange. It’ll become slow, laggy and in general, would not give a good experience. This is why it is necessary to clean up your iPad’s storage once in a while. To get rid of all the apps that you don’t use anymore and even the ones that now have better alternatives (looking at you WhatsApp). 

If you already have made the decision on which apps you’re going to uninstall then this process has become a lot shorter for you. But if you need some more information to form a better judgment on which apps to remove, then the process will be a bit different for you.

The Easier way 

1. Go to your home screen and press and hold on the app’s icon which you want to delete, and a menu will pop up.
2. Tap on Delete App.
3. A dialog box will appear asking you to confirm, so go ahead and press Delete.
4. The app will be deleted from your iPad.

The More Informed Way

1. Navigate to Settings – General.
2. Tap on iPad Storage. You will be presented with a list of all the apps installed on your devices. The apps will have the amount of storage they occupy stated beside them.
3. Tap on the app you want to uninstall.
4. Tap on the Delete App.

The app will be deleted from your iPad.

[ Related: iPad Out of Storage Space? Tips and Apps to Clean iPad Memory ]

5. Multitasking too slow? Turn off background app refresh

This feature was introduced way back in the prehistoric times of iOS 7. It basically refreshes an app keeping the feed fresh right before you use them. For some apps this can come really handy, updating your feed giving you the latest info. This feature, even though it is convenient, but you probably don’t need it for every single app on your iPad.

Apps like your daily news, stocks, these you want to keep updated at all times. But apps like your Smart Home Switch, Or Netflix, Amazon, these are not required as much frequently. Background App Refresh is also a huge culprit in eating up your battery life and clogging the performance of your iPad. Why is it a good idea to manage and regulate its behavior? 

You can choose to either completely turn off Background App Refresh for your iPad (this is only for the earlier generation iPads with less than sub-optimal performance and battery life) or individually turn it off for whichever app necessary.

Completely Turn Off Background App Refresh

1. Navigate to Setting – General.
2. Tap on Background App Refresh.
3. At the top right, turn the toggle to Off.

Turn Off Background App Refresh for Individual Apps

1. Navigate to Settings – General.
2. Tap on Background App Refresh.
3. You will see a list of all the apps installed on your iPad. Scroll through the list and toggle off the features for which app you deem it unnecessary. 

The functionality of some apps might be affected due to this, mainly Facebook because they use the background refresh protocol to “spy on you”. But if you’re a regular user you’ll not do anything different. Other than the fact that you would seem to last longer and apps are opening faster.

[ Related: How to Empty Trash on iPad – An In-Depth Guide ]

6. Use iMyFone Umate – All in one iPad cleaner and optimizer

Developed as a free and premium app made specially to help users clear out the junk from their iOS and iPadOS devices, iMyFone Umate makes easy work of speeding up a slow iPad. Although it uses the built-in features of iOS itself to optimize the system, the simplified user interface and one-click operation is what mainstream users will appreciate, especially those who aren’t tech-savvy.

1. Download the iMyFone Umate app from the official link.
2. Run the Umate app and connect your iPad to the computer using a USB cable.
3. You will be able to see the general storage information, including the used and free storage space.
4. Start off by using the 1-Click Free Up Space option, which will automatically scan your iPad.
5. In a few moments, you will be able to view the Photo Cache, Downloaded Temp Files, Crash Logs, and other junk files that can be deleted.
6. Hit the Clean button and let the app complete the process of cleaning out the files.

Moreover, the iMyFone Umate app lets you Backup & Compress or Export & Delete the Photos stored on your iPad, along with the ability to delete Apps, and even Erase All Data at once. There is even the option to just Erase Private Data if you don’t want to factory reset the iPad, but still get rid of your personal files and media.

A few more things to keep in mind.

• Do not update your iPad with a beta version of iOS, (unless you know what you’re doing.) These versions are used for testing and have a lot of bugs in them. They are also usually not that optimized, your battery life and performance will take a hit. 
• If you’re not aware of the risks and use a relatively old generation of iPad, stick to the official releases.

• Do not remove apps from Recents right after using them. This seems a logical thing to do, why keep an app running if I’m not using it, right? Well, that would be the case with an app that you use, say once a week or so. But for fairly regular use, if you’re constantly removing and adding the app onto your RAM, your iPad won’t be able to optimize its usage and this will lead to that app performing less efficiently. Anyways if you don’t use an app, the software is smart enough to shut it down by itself.

Conclusion

If you’ve done everything mentioned above and your iPad still feels like it’s from 2012, it probably is. The newer iPads come with a better, more efficient, and more powerful chip in them. So, if you are one of those people who are still using a 4-generation old iPad, maybe this Christmas is the time to get a new one. And, you can always exchange your old iPad for the newer ones, and that too for a hefty discount.

FAQs

Will I lose my data if I reset my iPad?

-No, you will not lose your data if you follow our procedure and reset your iPad. Although it is good practice to keep all your data backed-up, in iCloud or locally.

How do I get good battery life?

-The recipe to a good and battery life is to maintain its charge cycle, not overcharge it and preferably not charge it up to exactly 100%.

Will updating my iPad make it faster?

-This depends on the iPad you are using, some older generation iPads become sluggish after updating to the newest OS. The best thing to do is to check online in forums whether your device can handle the newest update. But updating does add new functionality, so its’s a choice between speed and snappiness or features and functionality.

Why is YouTube buffering so much in my iPad?

-It depends on what resolution you are trying to play the video at? If you have an older iPad, try and stay away from 4k 60fps videos and stick to 1440p. if it is still buffering, try updating the app. Or just stick to 1080p 60fps. That should solve the issue.

Suggested Read: How to Fix Slow YouTube Streaming on iPad

Back in 2007 when the very first iPhone came out, it boasted a storage capacity that started at 4GB, which was sufficient for its time. Over the years, with the resolution of mobile devices increasing, and the quality of apps available, the need for more storage has been growing steadily. The larger Retina HD display of the Apple iPad is capable of stunning visuals, which converts directly into large media files, leaving you wanting more storage space at times.

Unlike most Android tablets out there, the Apple iPad comes in preset storage variants, and there is no feature for expandable storage. If you purchased the basic 32GB version of the iPad, you’re probably regretting it now that the storage space is almost at full capacity, and there does not seem to be a way to expand it. Fret not, you aren’t the only sad Apple iPad user out there with this grave issue, and there are great ways to go around the limited storage space on your iPad.

First Things First – Check the iPad Storage

Before diving into the different solutions to free up space on your iPad, you need to take a step back and look at the number first. iPadOS comes with a detailed section that highlights the iPad Storage, breaking things down into a bar graph representing the amount of storage taken up by Apps, Photos, the System, Messages, and everything else.

To find out more, you need to launch the Settings app, navigate to the General tab, and then open iPad Storage to get into the details. The screen will give you a general idea of how the data on the iPad occupy much storage space, and how much is still available for you to use. Additionally, the same screen will also give you an overview of the storage space available on your iCloud account. By default Apple, offers 5GB of free storage to all iCloud users, which can be bumped up with a monthly subscription plan.

Offload Apps

There may be times when you might not need to have an app installed at all times, but the app data (login credentials, downloads, and app history) is something you don’t want to let go of. For these instances, Apple has added the ability to offload apps from the iPad and iPhone, while reclaims the space used by the app. However, this is different from removing the app entirely, since you still get to keep the documents and data of the app.

1. Open the Settings app from the iPad home screen.
2. Go to the General tab and tap on the iPad Storage section.
3. Find the list of apps and open the one you want to offload.
4. Press the Offload App button and confirm your action.

The app will be removed from the iPad, while preserving the internal files and settings so that you can reinstall it from the App Store with a single tap.

Delete App Data

In most cases, the app you are using may not be the real hoarder of storage space, but the media files, documents, and data you have stored in it could be. While you may not want to let go of a useful app entirely, there is the option to shed some of the dead weight from within the app, which you can do from the iPad Storage menu.

1. Open the Settings app from the iPad home screen.
2. Go to the General tab and tap on the iPad Storage section.
3. Open the app from the list you want to delete some of the app data for.
4. On the app menu screen, find the files at the bottom and press the Edit button.
5. Swipe left on the file, press the Delete button, and confirm your action.

Perform the same action for all of the other files you want to delete from within the app, which will immediately free up space from the system storage.  

Use iCloud to Store Data

Ever since iOS 9, Apple has put cloud storage into focus, with iCloud being the epicenter of all personal data storage across the entire ecosystem of its iDevices. If you have been relying on local storage for all your photos, videos, documents, and app data, it might be time to sync it all up with Apple iCloud and relieve the iPad of some burden.

By default, you get 5GB worth of iCloud data storage for free, which can be expanded with a monthly subscription from Apple. You can start by enabling Photos to be backed up directly to the iCloud account, where the bulk of storage space goes for most users.

1. Launch the Settings app on the iPad.
2. Scroll down to find Photos in the left tab and open it.
3. Press the toggle switch next to iCloud Photos to enable it.
4. Furthermore, enable the option to “Optimize iPad Storage”, which allows you to compress the images on the iPad, while keeping the original files stored in full resolution on the iCloud.

Additionally, you also have the option to handpick other aspects of the iPad data that is synced with iCloud, and here’s how you do it:

1. Open the Settings app and tap on the User Profile right at the top-left corner.
2. Tap on the iCloud menu, which will give you a detailed overview of what data takes up space on the iCloud account.
3. Several apps and services are listed below, each of which you can sync to iCloud by pressing the toggle switch right next to them.
4. Additionally, you have the option to Manage Storage button to shed some of the dead weight from the iCloud storage too.

Clear Safari Website Data

It may not seem like you’re saving much when clearing out the gunk from your web browser to reclaim lost storage space. However, for power users who browse the internet for hours each day, bit by bit, the Safari web browser can become a honeypot of web data that eats away at the iPad storage. For instance, we tried cleaning the website data for our iPad and were surprised to see upwards of 800MB being used by various websites.

1. Open the Settings app on the iPad.
2. Navigate to the Safari app on the left sidebar.
3. Scroll down to find the Advanced tab, and then open the Website Data tab.
4. Wait for the data to load, which should display the total website data stored on the device.
5. Tap on Remove All Website Data and confirm your action to continue.

You even have the option to selectively delete app data by swiping left on the website address and pressing the Delete button to confirm.

Add External Storage

One of the biggest gripes you could have with the Apple ecosystem is its limitations when speaking of expandable storage. While the Apple iPad is limited to the onboard storage you purchased it with, there is the option to add some external storage space.

There are special thumb drives designed to allow users to move data across mobile devices, with some even having the Lighting cable port. While the functionality of such removable pen drives for iPad is limited to only data such as photos and documents, it might be all you need to keep the iPad storage lightweight, while making it effortlessly simple to move data across from the iPad.

We recommend using the SanDisk iXpand Flash Drive Luxe, which comes with the Apple Lightning port on one end and the USB-C port on the other. Additionally, the iPad thumb drive comes with its very own iXpand Drive app, making it easier for you to create regular automatic backups, and although it isn’t perfect, it gets the job done.

Get the SanDisk iXpand Flash Drive Luxe

Disable Photo Stream

To offer you a more seamless user experience when using multiple iDevices, Apple has added a feature to make your iPhone and iPad photos available across different devices. When enabled, “My Photo Stream” allows you to view the pictures and videos simultaneously on the iPad and the iPhone too, which takes up storage space on both these devices. The photos are not stored on iCloud, and take up space on the device itself, which is why turning off the feature can save you plenty of megabytes or even gigabytes.

1. Open the Settings app on the iPad from the home screen.
2. Scroll down through the left sidebar to find the Photos app.  
3. Find My Photo Stream and press the toggle switch next to it to disable the feature.

If you had the feature enabled, turning it off will remove the My Photo Stream folder from the Photos app, along with its contents.

Use Google Photos

While Apple iCloud has stuck to its guns with 5GB of free storage, Google was far more accommodating to its Google Photos users. All the way up until the year 2020, users were allowed to upload unlimited photos and videos, at no added charges, while the images being optimized (compressed) for storage. Although Google is abandoning this free-for-all concept due to the storage crisis that it faces, you still get 15GB of free storage per Google account, which is three times what Apple iCloud offers.

1. Download the Google Photos app from the App Store.
2. Log in with your Google account.
3. Tap on the user profile in the top-right corner and select the Photos settings tab.
4. Select Back up & sync from the list and press the toggle switch to enable the feature.

All your photos in the iPad Photos app will be synced with the Google account, which can then be viewed across different platforms with ease.

Flush Out Old Messages

The Messages app for iOS and macOS is seamless and a breeze to use, and if that’s where most of your conversations happen on the iPad, it can also be a space-hoarding beast. With plenty of media shared all the time during texting, the Messages app could be harboring gigabytes of your iPad data with media and files you don’t even need. Rather than cherry-picking the messages you keep, iPadOS offers you the ability to choose how long you hold the messages on the iDevice.

1. Launch Settings and scroll down to find the Messages app.
2. On the right side of the screen, find the Keep Messages tab.
3. Choose to keep messages for 30 Days, 1 Year, or Forever, by tapping on it.

Reduce Camera Photos Size

The iPhone and iPad are known to possess not just great hardware for the camera, but even better software that brings it all together. To do what it does best, the iPad clicks multiple pictures of the same subject, and stitches them together to create different effects such as the Portrait Mode, Panorama, and others. However, storing two versions of the same image means that twice the space is taken up, which isn’t great when your iPad storage is already filled to the brim.

1. Open the Settings app on the iPad.
2. On the sidebar, find the Camera app and open it.
3. Press the toggle switch next to Keep Normal Photo to disable it.

Optimize iPad Storage with iMobie PhoneClean

There isn’t a short supply of iOS and iPadOS cleaning tools that have been specifically designed to rev up the performance of your device, and reclaim some essential storage space. Out of the sea of options available, we have shortlisted iMobie PhoneClean as the preferred pick for this particular guide, since it is not only available on a free trial to test out, but supports both Windows as well as macOS systems.

1. Download and install the PhoneClean app on your computer (Download Link).
2. Connect the iPad to the computer using a USB cable and launch the PhoneClean app.
3. You can begin by scanning the iPad storage, so click on the Scan button to begin.
4. This will launch the Quick Clean feature, which analyzes your iPad storage and provides a quick breakdown of what items you can immediately remove for a safe cleanup.  
   
5. Apart from scanning the entire device, you can also choose what items PhoneClean scans by pressing the Settings icon next to the connected iDevice name.
6. The Silent Clean option allows you to flush out junk files, crash logs, temporary files, artwork caches, and other data.
   
7. Another option on the list is Internet Clean, which allows you to scan through saved bookmarks, cached website data, webmail junk, and more.
   
8. There is also the inclusion of Privacy Clean that helps you wash out old messages, attachments, and other sensitive data, while System Clean focuses more on unused app data and notifications.
9. Lastly, Mobie PhoneClean also comes with the option to Erase Clean the iPad, which essentially removes all content from the device, just like a factory reset would.

Apart from these features, the app comes with an entire Toolbox which allows you to selectively clean out items such as contacts, photos, media files, app data, notes, and more.

Final Words

Several users have reported that the Other section takes up a significant portion of the overall iPad storage space. While Apple does not offer an easy way to find out the contents of the Other section in the storage app, it is mostly packed with cached data, settings, messages, voice memos, and more trash files. Even after using all of the steps highlighted above, if you cannot get rid of the “iPad Almost Full” message from popping up every time you try to download a file or install an app, we recommend you consider performing a factory reset.

We cover everything about the Apple iPad extensively here, everything from a guide to retrieve iPad Notes data, to fix the frozen iPad the easy way. If you have deleted some apps or notes from your iPad, but later want to recover them back, here are top data recovery tools to help you out.